| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Pillow is a Python imaging library. From 2.0.0 until 13.0.0, Pillow has a heap buffer overflow and stale-heap disclosure in _tiffWriteProc when saving compressed TIFF data through libtiff to a target without a usable fileno(), such as BytesIO. The callback sizes its allocation from the prior buffer size instead of the current write position, allowing an attacker-controlled out-of-line TIFF tag or retained ICC profile to be copied beyond the allocation after libtiff seeks forward. This overflow can crash the process and may allow code execution. Independently, unwritten alignment gaps in compressed TIFF output larger than 64 KiB can disclose stale heap bytes without a crafted tag. File paths and targets with real file descriptors are unaffected. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. Prior to 13.0.0, Pillow's P;2L and P;4L raw decoders can read past the end of an input buffer. ImagingRawDecode calculates a packed-pixel row size, while the unpackers read separately padded bit planes. A caller can supply a buffer and image dimensions whose accepted size is smaller than the unpacker's actual footprint. This can disclose up to three adjacent heap bytes in output pixels or crash the process. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 11.3.0 until 13.0.0, Pillow has a heap use-after-free when libtiff rejects a tag while encoding TIFF data to an in-memory buffer. When an application saves attacker-influenced TIFF tags to BytesIO, libtiff can reject a tag during encoding in ImagingLibTiffEncode; the error path then frees the output buffer without closing or clearing the TIFF handle, and later cleanup flushes through the write callback into freed memory, which can crash the process and may enable code execution. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. Prior to 13.0.0, Pillow's rank-based filters can dereference invalid image storage for a zero-size image. ImagingExpand() allocates a non-empty output and then faults while replicating edges by reading the first pixel from empty input storage; ImagingRankFilter is never reached. An attacker can supply or cause creation of a zero-size image to an application that applies a rank, median, minimum, or maximum filter. This causes a native process crash. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 8.2.0 until 13.0.0, Pillow's tiled-TIFF decoder can read past the tile buffer while copying four-byte pixels. In _decodeTile, libtiff can return a tile allocation smaller than the required row stride multiplied by the tile length, and Pillow's stride-and-copy loop walks beyond that allocation. An attacker can supply a crafted tiled TIFF to an application that loads it. This can expose adjacent heap data in pixels or crash the process. This issue is fixed in version 13.0.0. |
| There is a defect in the CPython standard library module “mimetypes” where on Windows the default list of known file locations are writable meaning other users can create invalid files to cause MemoryError to be raised on Python runtime startup or have file extensions be interpreted as the incorrect file type.
This defect is caused by the default locations of Linux and macOS platforms (such as “/etc/mime.types”) also being used on Windows, where they are user-writable locations (“C:\etc\mime.types”).
To work-around this issue a user can call mimetypes.init() with an empty list (“[]”) on Windows platforms to avoid using the default list of known file locations. |
| tarfile.tar_filter could be bypassed using crafted link entries, including symlinks with empty or directory-like names, to redirect later archive members outside the intended extraction directory. This allowed a malicious tar archive to cause tarfile.extractall() with filter="tar" to write files outside the destination directory, subject to the permissions of the extracting process.
This is the tarfile.tar_filter counterpart of CVE-2026-7774, which covered tarfile.data_filter. |
| The cleanup of tempfile.TemporaryDirectory is vulnerable to a race condition. An attacker who can modify the tree during cleanup can replace a directory with a symbolic link, causing files outside of the temporary directory to be deleted or have their permissions and file flags reset, with the privileges of the process performing the cleanup. Note that platforms where shutil.rmtree.avoids_symlink_attacks is false, remain affected, and file flags may still be reset outside of the tree on all platforms. |
| Python has added a denylist for known compromised certificates to the "ssl" module to ensure user safety even without certificate revocation configured. Known compromised certificates will automatically be rejected regardless of the SSLContext policy configuration. |
| Pillow is a Python imaging library. From 7.2.0 until 13.0.0, Pillow can enter an infinite loop while determining the frame count of a MIC image. MicImageFile inherits TIFF frame traversal, but MicImageFile.tell reports the OLE stream index and its seek() resets TIFF frame state, so an embedded TIFF with at least three IFDs never advances. When an application with olefile installed reads n_frames or saves all frames from a crafted MIC file, the non-advancing traversal can hold a worker at full CPU indefinitely. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow's PdfParser.get_value() can recurse without a limit while reading nested PDF objects. The parser follows attacker-controlled arrays and dictionaries when an existing PDF is opened for append. An attacker can provide a deeply nested PDF to an application that saves an image with PDF append enabled. This can raise an uncaught RecursionError or terminate the worker, causing denial of service. This issue is fixed in version 13.0.0. |
| Modules/_pickle.c in Python before 3.7.1 has an integer overflow via a large LONG_BINPUT value that is mishandled during a "resize to twice the size" attempt. This issue might cause memory exhaustion, but is only relevant if the pickle format is used for serializing tens or hundreds of gigabytes of data. This issue is fixed in: v3.4.10, v3.4.10rc1; v3.5.10, v3.5.10rc1, v3.5.7, v3.5.7rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.7, v3.6.7rc1, v3.6.7rc2, v3.6.8, v3.6.8rc1, v3.6.9, v3.6.9rc1; v3.7.1, v3.7.1rc1, v3.7.1rc2, v3.7.2, v3.7.2rc1, v3.7.3, v3.7.3rc1, v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9. |
| python before versions 2.7.15, 3.4.9, 3.5.6rc1, 3.6.5rc1 and 3.7.0 is vulnerable to catastrophic backtracking in the difflib.IS_LINE_JUNK method. An attacker could use this flaw to cause denial of service. |
| An issue in the urllib.parse component of Python before 3.11.4 allows attackers to bypass blocklisting methods by supplying a URL that starts with blank characters. |
| A use-after-free exists in Python through 3.9 via heappushpop in heapq. |
| An issue was discovered in Python before 3.11.1. An unnecessary quadratic algorithm exists in one path when processing some inputs to the IDNA (RFC 3490) decoder, such that a crafted, unreasonably long name being presented to the decoder could lead to a CPU denial of service. Hostnames are often supplied by remote servers that could be controlled by a malicious actor; in such a scenario, they could trigger excessive CPU consumption on the client attempting to make use of an attacker-supplied supposed hostname. For example, the attack payload could be placed in the Location header of an HTTP response with status code 302. A fix is planned in 3.11.1, 3.10.9, 3.9.16, 3.8.16, and 3.7.16. |
| The Keccak XKCP SHA-3 reference implementation before fdc6fef has an integer overflow and resultant buffer overflow that allows attackers to execute arbitrary code or eliminate expected cryptographic properties. This occurs in the sponge function interface. |
| In Python before 3.10.3 on Windows, local users can gain privileges because the search path is inadequately secured. The installer may allow a local attacker to add user-writable directories to the system search path. To exploit, an administrator must have installed Python for all users and enabled PATH entries. A non-administrative user can trigger a repair that incorrectly adds user-writable paths into PATH, enabling search-path hijacking of other users and system services. This affects Python (CPython) through 3.7.12, 3.8.x through 3.8.12, 3.9.x through 3.9.10, and 3.10.x through 3.10.2. |
| A flaw was found in Python, specifically within the urllib.parse module. This module helps break Uniform Resource Locator (URL) strings into components. The issue involves how the urlparse method does not sanitize input and allows characters like '\r' and '\n' in the URL path. This flaw allows an attacker to input a crafted URL, leading to injection attacks. This flaw affects Python versions prior to 3.10.0b1, 3.9.5, 3.8.11, 3.7.11 and 3.6.14. |
| Python 3.x through 3.10 has an open redirection vulnerability in lib/http/server.py due to no protection against multiple (/) at the beginning of URI path which may leads to information disclosure. NOTE: this is disputed by a third party because the http.server.html documentation page states "Warning: http.server is not recommended for production. It only implements basic security checks." |
