| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An unauthenticated remote attacker can modify the TLS client trust store in Brocade ASCG versions before 3.5.0. By supplying an unauthorized Certificate Authority (CA) certificate to an unauthenticated management interface, the attacker can cause the system to trust unauthorized certificates, potentially enabling Man-in-the-Middle (MITM) attacks against outbound communications with managed switches and peer nodes. |
| cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. Prior to version 46.0.6, DNS name constraints were only validated against SANs within child certificates, and not the "peer name" presented during each validation. Consequently, cryptography would allow a peer named bar.example.com to validate against a wildcard leaf certificate for *.example.com, even if the leaf's parent certificate (or upwards) contained an excluded subtree constraint for bar.example.com. This issue has been patched in version 46.0.6. |
| libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. |
| Improper Following of a Certificate's Chain of Trust vulnerability in Erlang OTP public_key (pubkey_cert module) allows a non-CA certificate to be accepted as an intermediate issuer, enabling certificate chain forgery.
In lib/public_key/src/pubkey_cert.erl, pubkey_cert:validate_extensions/7 contains two flaws that together allow a certificate with basicConstraints cA:false and no keyUsage extension to be used as an intermediate issuer in a chain passed to public_key:pkix_path_validation/3: the cA:false clause recurses into the remaining extensions without rejecting the certificate when it is in issuer position, and the keyUsage check only fires when the extension is present, so a certificate lacking keyUsage entirely bypasses the keyCertSign enforcement.
Any party holding an end-entity certificate with basicConstraints cA:false and no keyUsage extension, issued by any CA in the victim's trust store, can use that certificate's private key to sign forged leaf certificates for arbitrary identities. public_key:pkix_path_validation/3 accepts the resulting chain, and by extension every TLS or mTLS endpoint built on the OTP ssl application that relies on the default verifier is affected, including server identity verification on the client side and client certificate verification on mTLS servers.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.19, OTP 28.5.0.8, and OTP 29.1.2, corresponding to public_key from 0.22 before 1.17.1.7, 1.20.3.6, and 1.21.8. Whether OTP before OTP 17.0, corresponding to public_key before 0.22, is affected is unknown. |
| An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Denial of service, Information disclosure, and Remote execution. |
| The function `OCSP_basic_verify` verifies the signer certificate on an OCSP response. In the case where the (non-default) flag OCSP_NOCHECKS is used then the response will be positive (meaning a successful verification) even in the case where the response signing certificate fails to verify. It is anticipated that most users of `OCSP_basic_verify` will not use the OCSP_NOCHECKS flag. In this case the `OCSP_basic_verify` function will return a negative value (indicating a fatal error) in the case of a certificate verification failure. The normal expected return value in this case would be 0. This issue also impacts the command line OpenSSL "ocsp" application. When verifying an ocsp response with the "-no_cert_checks" option the command line application will report that the verification is successful even though it has in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). |
| The urllib3 library 1.26.x before 1.26.4 for Python omits SSL certificate validation in some cases involving HTTPS to HTTPS proxies. The initial connection to the HTTPS proxy (if an SSLContext isn't given via proxy_config) doesn't verify the hostname of the certificate. This means certificates for different servers that still validate properly with the default urllib3 SSLContext will be silently accepted. |
| libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake. |
| libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse, if one of them matches the setup.Due to errors in the logic, the config matching function did not take 'issuercert' into account and it compared the involved paths *case insensitively*,which could lead to libcurl reusing wrong connections.File paths are, or can be, case sensitive on many systems but not all, and caneven vary depending on used file systems.The comparison also didn't include the 'issuer cert' which a transfer can setto qualify how to verify the server certificate. |
| curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single "static" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly. |
| curl 7.41.0 through 7.73.0 is vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response. |
| A flaw was found in the Windows Machine Config Operator (WMCO) for Red Hat OpenShift Container Platform. WMCO establishes SSH connections to Windows worker nodes without verifying the remote server host key. An adjacent-network attacker who can intercept or redirect WMCO's SSH session can capture WICD and kubelet bootstrap credentials transferred during node configuration, enabling compromise of Windows node identities in the cluster. |
| urllib3 is an HTTP client library for Python. From 1.26.0 until 2.8.0, the proxy_ssl_context, proxy_assert_hostname, proxy_assert_fingerprint, ssl_context, cert_reqs, verify_mode, use_forwarding_for_https=True, and CERT_NONE configuration paths fail to remain separated because target-server TLS settings are incorrectly applied to the HTTPS proxy connection. The trigger is that an application uses an HTTPS proxy and configures target-server TLS settings that must remain separate from the proxy TLS handshake, including HTTPS forwarding with target-specific identity or credentials. Applying cert_reqs=CERT_NONE can overwrite proxy_ssl_context.verify_mode in place, and the mutation persists so later connections reusing the same context may connect to the HTTPS proxy without certificate verification. The attack mechanism is that an attacker intercepts and impersonates the HTTPS proxy after the effective proxy policy accepts the attacker's certificate. The impact is that the attacker can observe or modify forwarded traffic or receive a target TLS client certificate, while CONNECT tunneling still preserves the separate end-to-end target TLS connection. This issue is fixed in version 2.8.0. |
| Dell System Update, versions prior to 2.3.0.0, contains an Improper Certificate Validation vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote execution. |
| FreeRDP 3.0.0 before 3.32.0 contains an improper certificate validation vulnerability in freerdp_http_request() in libfreerdp/utils/http.c that completes TLS handshakes without verifying the server certificate chain. On-path attackers can impersonate login.microsoftonline.com in the Azure AD authentication flow to capture OAuth authorization codes and substitute the OpenID discovery document. |
| In ssh-keygen in OpenSSH before 10.6, certificates could have incorrect expiration times because of Daylight Saving mishandling. There can be a slightly more severe effect on users in certain Antarctic locations. |
| Improper Certificate Validation vulnerability in hexpm hex allows an attacker who can intercept HTTPS connections, and holds a certificate for a Hex host issued by a CA in Hex's bundled CA store, to impersonate that host to users who set cacerts_path to a CA store that leaves that CA out.
cacerts_path (HEX_CACERTS_PATH) is documented as the path to the CA certificate store, used instead of the CA bundle that ships with Hex. Hex.HTTP.SSL.ssl_opts/1 passes the configured store as the cacerts option, but builds the partial_chain callback from the bundled store whether cacerts_path is set or not. Hex.HTTP.SSL.partial_chain/2 accepts a server chain when any certificate in it has the same public key as a bundled CA certificate, so a chain that leads to a bundled CA passes verification although the configured store doesn't contain that CA. Hostname verification still applies.
This issue affects hex: from 0.20.2 before 2.5.2. |
| The Joyland AI app accepts invalid SSL certificates in the invisible advertisement WebView by default. |
| @fastify/reply-from is a Fastify plugin that forwards requests to an upstream HTTP or HTTPS server. In versions prior to 12.7.0, all of the built-in HTTPS transports override the secure default and set rejectUnauthorized to false, so the proxy does not verify the TLS certificate of the upstream even when the application points it at an https upstream in the default configuration. An on-path network attacker can therefore impersonate the configured HTTPS upstream, read the credentials and request bodies the proxy forwards, and return forged responses that the application trusts. The issue is fixed in @fastify/reply-from 12.7.0, and users should upgrade to 12.7.0 or later. As a workaround, pass an explicit rejectUnauthorized true on the transport, supply an already configured undici instance, or use the undici global agent. |
