| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix ntfs_mount_options leak in ntfs_fill_super()
In ntfs_fill_super(), the fc->fs_private pointer is set to NULL without
first freeing the memory it points to. This causes the subsequent call to
ntfs_fs_free() to skip freeing the ntfs_mount_options structure.
This results in a kmemleak report:
unreferenced object 0xff1100015378b800 (size 32):
comm "mount", pid 582, jiffies 4294890685
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 ed ff ed ff 00 04 00 00 ................
backtrace (crc ed541d8c):
__kmalloc_cache_noprof+0x424/0x5a0
__ntfs_init_fs_context+0x47/0x590
alloc_fs_context+0x5d8/0x960
__x64_sys_fsopen+0xb1/0x190
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This issue can be reproduced using the following commands:
fallocate -l 100M test.file
mount test.file /tmp/test
Since sbi->options is duplicated from fc->fs_private and does not
directly use the memory allocated for fs_private, it is unnecessary to
set fc->fs_private to NULL.
Additionally, this patch simplifies the code by utilizing the helper
function put_mount_options() instead of open-coding the cleanup logic. |
| In the Linux kernel, the following vulnerability has been resolved:
freevxfs: don't BUG() on unknown typed-extent type
vxfs_bmap_typed() handles four typed-extent types and calls BUG() in
its default case, so an on-disk typed extent with any other type value
crashes the kernel. It is reachable from ioctl(FIBMAP) on a regular
file:
kernel BUG at fs/freevxfs/vxfs_bmap.c:230!
RIP: vxfs_bmap_typed fs/freevxfs/vxfs_bmap.c:230 [inline]
vxfs_bmap1+0x128a/0x12d0 fs/freevxfs/vxfs_bmap.c:257
Replace the BUG() with WARN_ON_ONCE() and return 0 -- the value
vxfs_bmap_typed() already returns on failure (and from the DEV4 case
above); vxfs_getblk() maps 0 to -EIO, so the ioctl fails cleanly. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: zero at allocation time
There are occasional LLM hints wrt. leaking uninitialized data to
userspace via ctnetlink. Just zero at allocation time,
expectations are not frequently used these days.
Intentionally keeps _init as-is because we could theoretically
support re-init, so add the missing exp->dir there. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect
Clearly, from a user perspective, it must be valid to configure
WoWLAN and then suspend while not connected to a network. Since
mac80211 doesn't distinguish these cases and simply calls the
driver to suspend whenever WoWLAN is configured, the driver has
to cleanly handle the case where it's called for WoWLAN, it's
not connected but there's also no netdetect configured.
Remove the WARN_ON() and keep returning 1 to disconnect and
then suspend. |
| In the Linux kernel, the following vulnerability has been resolved:
parport: Fix race between port and client registration
The parport subsystem registers port devices before they are fully
initialised, resulting in a race condition where client drivers such
as lp can attach to ports that are not completely initialised or even
being torn down.
When the port and client drivers are built as modules and loaded
around the same time during boot, this occasionally results in a
crash. I was able to make this happen reliably in a VM with a
PC-style parallel port by patching parport_pc to fail probing:
> --- a/drivers/parport/parport_pc.c
> +++ b/drivers/parport/parport_pc.c
> @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base,
> if (!p)
> goto out3;
>
> - base_res = request_region(base, 3, p->name);
> + base_res = NULL;
> if (!base_res)
> goto out4;
>
and then running:
while true; do
modprobe lp & modprobe parport_pc
wait
rmmod lp parport_pc
done
for a few seconds.
In the long term I think port registration should be changed to put
the call to device_add() inside parport_announce_port(), but since the
latter currently cannot fail this will require changing all port
drivers.
For now, add a flag to indicate whether a port has been "announced"
and only try to attach client drivers to ports when the flag is set. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync
hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing
both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was
obtained from an RCU-protected iteration over hdev->conn_hash.list and
is not valid once these locks are dropped. A concurrent disconnect can
free the hci_conn between the unlock and the dereference, causing a
use-after-free read.
The cancellation mechanism in hci_conn_del() cannot prevent this because
hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL:
hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL);
While hci_conn_del() dequeues with data=conn:
hci_cmd_sync_dequeue(hdev, NULL, conn, NULL);
Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never
matches, and the pending work item is not cancelled.
Fix this by saving conn->conn_timeout into a local variable while the
locks are still held, so the stale conn pointer is never dereferenced
after unlock.
This is the same class of bug as the one fixed by commit 035c25007c9e
("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which
addressed the identical pattern in a different function.
This vulnerability was identified using 0sec.ai, an open-source
automated security auditing platform (https://github.com/0sec-labs). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
iso_sock_close() calls iso_sock_clear_timer() before acquiring
lock_sock(sk).
iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the
socket lock held:
if (!iso_pi(sk)->conn)
return;
cancel_delayed_work(&iso_pi(sk)->conn->timeout_work);
Concurrently, iso_conn_del() executes under lock_sock(sk) and calls
iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in
the final reference to the connection being dropped:
CPU0 CPU1
---- ----
iso_sock_clear_timer()
if (conn != NULL) ... lock_sock(sk)
iso_chan_del()
iso_pi(sk)->conn = NULL
cancel_delayed_work(conn) /* NULL deref or UAF */
iso_pi(sk)->conn is not stable across the unlock window, causing a
NULL pointer dereference or use-after-free.
Serialize iso_sock_clear_timer() with the socket lock by moving it
inside lock_sock()/release_sock(), matching the pattern used in
iso_conn_del() and all other call sites. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix the error path in dpaa2_switch_rx()
In case of an error in dpaa2_switch_rx(), the dpaa2_switch_free_fd()
function is called in order to free the FD. This is incorrect since the
dpaa2_switch_free_fd() is intended to be used on Tx frame descriptors,
meaning that it expects in the software annotation area of the FD data
to find a valid skb pointer on which to call dev_kfree_skb().
Fix this by extracting the dma_unmap_page() from
dpaa2_switch_build_linear_skb() directly into the dpaa2_switch_rx()
function. This allows us to directly use free_pages() in case of an
error before an SKB was created and kfree_skb() afterwards. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: restore RX state on reload failure
lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before
reallocating the RX resources for the new MTU. If the allocation fails,
the restore path puts these fields back before restarting RX.
However, the reload path also updates rx->page_order and rx->max_mtu
before calling lan966x_fdma_rx_alloc(). These fields are not restored on
failure, so RX can be restarted with the old pages, old FDMA state and
old page pool, but with the page geometry from the failed new MTU.
This can make the XDP path advertise a frame size derived from the new
page_order while the actual RX pages still come from the old allocation.
For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be
called with a frame size larger than the restored RX pages.
lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page
pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If
fdma_alloc_coherent() fails, the new page pool is destroyed, but the
rollback path does not restore the per-port XDP RXQ mem model
registration either.
Save and restore rx->page_order and rx->max_mtu, and restore the old page
pool registration for each port's XDP RXQ before RX is started again.
This keeps the restored RX state consistent after a failed reload. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Use devm_pm_runtime_enable()
sashiko complained about early usage of the device while probe isn't
completed. This can be mitigated by delaying the pm_runtime_enable()
into the removal path instead doing it early. This ensures that in an
error case the device is removed (and imx_mu_shutdown()) before
pm_runtime_disable() so we don't have to do this manually.
For the order to work, lets move devm_mbox_controller_register() until
after the pm-runtime part. So the reverse order will be mbox-controller
removal followed by disabling pm runtime.
Use devm_pm_runtime_enable(), remove manual pm_runtime_disable()
invocations and move the pm_runtime handling in probe before
devm_mbox_controller_register(). |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: let stripe batch bm_seq comparison wrap-safe
Once the 32-bit seq wraps, a newer bm_seq can look smaller
than old, so .. covert to wrap-safe calculate way. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/ras: reset CPER ring on corrupt entry size
When CPER ring overflow handling advances the read pointer, it trusts the
parsed entry size from the current ring contents. Corrupt CPER data can
produce an entry size that does not advance rptr after dword conversion
and pointer masking.
In that case the recovery loop keeps testing the same location while
holding the CPER ring mutex. This can hang the worker that is writing the
next CPER record.
Detect a no-progress rptr update and reset the CPER ring to an empty
state instead. This drops the corrupt contents and lets the writer leave
the recovery path without spinning. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Validate SENSOR_UPDATE payload size
SENSOR_UPDATE carries one or more sensor readings after the fixed
notification header. The parser derives the expected reading count
from the sensor description, but it did not verify that the received
payload contains those entries before parsing them.
Reject truncated update notifications before reading the variable
array. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate deauth frame length before reason access
ieee80211_rx_mgmt_deauth() reads the deauth reason code before checking
that the fixed field is actually present in the received frame.
Validate the deauth frame length first and only then read the reason
code. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: reject undersized HWSIM_ATTR_TX_INFO
hwsim_tx_info_frame_received_nl() casts the HWSIM_ATTR_TX_INFO payload
to a struct hwsim_tx_rate * and unconditionally reads
IEEE80211_TX_MAX_RATES entries (8 bytes) from it. The policy only bounds
the attribute from above (NLA_BINARY .len is a maximum) and the op sets
GENL_DONT_VALIDATE_STRICT, so a short or zero-length attribute is
accepted and the loop reads past the payload.
Require the exact length in the policy, so a malformed attribute is
rejected before the handler runs. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v5: Immediately exec priority drop following activate
With GICv5 an interrupt of equal or lower priority cannot be signalled
until there has been a priority drop. This is done via the GIC CDEOI
system instruction. Once this has been executed, the hardware is able
to signal the next interrupt if there is one.
As all interrupts are programmed to have the same priority, no new
interrupts can be signalled until the priority drop has happened. This
can cause issues when, for example, an interrupt remains active while
a long running process takes place, such as when injecting a physical
interrupt into a guest VM in software.
The GICv5 driver has so far done the priority drop as part of
irq_eoi(), i.e., at the same time as deactivating the interrupt. This
means that any long running process (or VM) could block incoming
interrupts, effectively causing a denial of service for all other
interrupts.
Rather than doing the EOI as part of irq_eoi() (which the name would
suggest would be a good place for it), move it to happen immediately
after acknowledging an interrupt in the main GICv5 interrupt
handler. The deactivation of interrupts (GIC CDDI) remains implemented
as part of irq_eoi(), which means that the same interrupt cannot be
signalled a second time until deactivated by software. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed
When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has
no MSI controller device tree node and GICv4, it results a panic as
“gic_domain” is NULL and the kernel attempts to access it.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
Mem abort info:
ESR = 0x0000000096000006
CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT
Hardware name: linux,dummy-virt (DT)
pstate: 81402005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : __irq_domain_instantiate+0x1d4/0x578
lr : __irq_domain_instantiate+0x1cc/0x578
Set vLPI support to false at init time if the host has no ITS, so it
propagates properly to kvm_vgic_global_state.has_gicv4. |
| In the Linux kernel, the following vulnerability has been resolved:
host1x: bus: Fix missing ops null check in error teardown
In host1x_device_init(), the error teardown paths do not check
client->ops before dereferencing it, unlike the forward init paths
which correctly guard with 'client->ops &&'. This can result in a
NULL pointer dereference if client->ops is NULL.
Fix by adding the missing client->ops check in both the teardown
and teardown_late labels. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/gsp: add SEC2 to GA100 chip table
The booter-load and booter-unload firmware run on the SEC2 falcon.
During tu102_gsp_oneinit(), the booter constructor needs device->sec2
to access the SEC2 falcon.
Without the .sec2 entry, device->sec2 is NULL and this dereference
crashes during GSP-RM boot. |
| Improper certificate validation in Active Directory Federation Services (AD FS) allows an unauthorized attacker to perform spoofing over a network. |
