| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: don't schedule deferred kernel page table freeing while booting
Booting with a boot-time function tracer and a filter, for example
ftrace=function ftrace_filter=pud_free_pmd_page
panics on 7.3-rc4 as soon as the tracer starts:
[ 23.531178] Starting tracer 'function'
[ 23.675800] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN NOPTI
[ 23.819917] KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7]
[ 23.964025] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 7.3.0-rc4-fe2ec83746e5-with-fixes-v2+ #195 PREEMPT(undef)
[ 24.252248] RIP: 0010:__queue_work+0xab/0xf00
[ 25.981629] Call Trace:
[ 26.125727] <TASK>
[ 26.413912] ? pagetable_free_kernel+0x20/0x120
[ 26.990283] queue_work_on+0x97/0xf0
[ 27.134382] __cpa_collapse_large_pages+0x501/0x6f0
[ 27.566662] cpa_flush+0x394/0x620
[ 27.998953] change_page_attr_set_clr+0x321/0x4a0
[ 29.151729] set_memory_rox+0xa2/0xf0
[ 29.584018] create_trampoline+0x431/0x6f0
...
[ 44.343347] Kernel panic - not syncing: Attempted to kill the idle task!
The boot-time tracer is started from early_trace_init(), which runs
before workqueue_init_early(). Making its trampoline read-only splits a
large page, and CPA collapses it again right away. The split table has
been a kernel page table since commit 9e4a3ec3411b
("x86/mm/pat: Allocate split page tables as kernel page tables"), so the
collapse frees it through pagetable_free_kernel(), which queues work on
system_percpu_wq - still NULL at that point. That commit is correct in
itself; it only lets CPA reach pagetable_free_kernel() before the
workqueue that function relies on exists.
Keep putting the table on the list, but don't schedule the work while
the system is still booting. A core_initcall schedules it once to free
whatever was queued by then. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/register: don't exempt disabled rings from task restrictions
A ring created with IORING_SETUP_R_DISABLED is exempt from its register
restrictions until it is enabled. This lets the creator register the
restrictions and then enable the ring with IORING_REGISTER_ENABLE_RINGS,
whether or not that opcode is in the allowed set.
Since commit ed82f35b926b ("io_uring: allow registration of per-task
restrictions"), a ring also inherits restrictions from the task that
creates it, and the same exemption applies to those. A task whose
register opcodes are restricted can therefore create a disabled ring,
issue any register opcode on it, and then enable it.
Mark rings whose restrictions were inherited from the task, and keep
checking register opcodes for them while the ring is disabled. Enabling
such a ring now requires IORING_REGISTER_ENABLE_RINGS to be in the
task's allowed set. Per-ring restrictions registered on a disabled ring
work as before.
[axboe: amend with inheritance flag fixup] |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix buffer overflow in inline mode with large tag size
In inline mode, dm_integrity_check and dm_integrity_inline_recheck
compute the checksum of each block into an on-stack buffer of
HASH_MAX_DIGESTSIZE bytes. integrity_sector_checksum pads its result
with zeroes up to the tag size, so if the tag size is larger than
HASH_MAX_DIGESTSIZE, the padding runs past the end of the buffer. With
CONFIG_STACKPROTECTOR the kernel panics in dm_integrity_check on the
first read.
Enlarge both buffers to hold MAX_TAG_SIZE bytes, as commit b93b6643e9b5
("dm integrity: fix a crash with unusually large tag size") did for
integrity_metadata.
Note that this is not a security bug because the buffer overflow can only
be triggered by root. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Add missing bits in airoha_qdma_cleanup_tx_queue()
Similar to airoha_qdma_cleanup_rx_queue(), reset DMA TX descriptors in
airoha_qdma_cleanup_tx_queue routine. Moreover, reset TX_DMA_IDX to
TX_CPU_IDX to notify the NIC the QDMA TX ring is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mtk-snfi: unregister ECC engine on probe failure and remove() callback
mtk_snand_probe() registers the on-host NAND ECC engine, but teardown was
missing from both probe unwind and remove-time cleanup. Add a devm cleanup
action after successful registration so
nand_ecc_unregister_on_host_hw_engine() runs automatically on probe
failures and during device removal. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not found
In mtk_pcie_setup_irq(), the IRQ domains are allocated before the
controller's IRQ is fetched. If the latter fails, the function
directly returns an error, without cleaning up the allocated domains.
Hence, reverse the order so that the IRQ domains are allocated after the
controller's IRQ is found.
This was flagged by Sashiko during a review of "[PATCH v6 0/7] PCI:
mediatek-gen3: add power control support". |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Propagate error from visit_tailcall_insn
Commit e40f5a6bf88a ("bpf: correct stack liveness for tail calls") added
visit_tailcall_insn() but did not check its return value. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop task_to_inode and inet_conn_established from lsm sleepable hooks
bpf_lsm_task_to_inode() is called under rcu_read_lock() and
bpf_lsm_inet_conn_established() is called from softirq context, so
neither hook can be used by sleepable LSM programs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Clear wcid pointer in mt7996_mac_sta_deinit_link()
Clear WCID pointer removing the sta link in mt7996_mac_sta_deinit_link
routine. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: close TOCTOU race while computing rcv_wnd
The MPTCP output path access locklessly the MPTCP-level ack_seq
in multiple times, using possibly different values for the data_ack
in the DSS option and to compute the announced rcv wnd for the same
packet.
Refactor the cote to avoid inconsistencies which may confuse the
peer. Also ensure that the MPTCP level rcv wnd is updated only when
the egress packet actually contains a DSS ack. |
| In the Linux kernel, the following vulnerability has been resolved:
net: garp: fix unsigned integer underflow in garp_pdu_parse_attr
The receive-side GARP attribute parser computes dlen with reversed
operands:
dlen = sizeof(*ga) - ga->len;
ga->len is the on-wire attribute length and includes the GARP attribute
header. For normal attributes with data, ga->len is larger than
sizeof(*ga), so the subtraction underflows in unsigned arithmetic.
The resulting value is later passed to garp_attr_lookup(), whose length
argument is u8. After truncation, the parsed data length usually no
longer matches the length stored for locally registered attributes, so
received Join/Leave events are ignored. This breaks the GARP receive path
for common attributes, such as GVRP VLAN registration attributes.
Compute the data length as the attribute length minus the header length. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
The aoe driver (or similar) generates a non-IPv6 packet
(e.g., ETH_P_AOE) and queues it for transmission via dev_queue_xmit()
on a 6LoWPAN interface (configured by the user or test case).
Since the packet is not IPv6, the 6LoWPAN header_ops->create function
(lowpan_header_create or header_create) returns early without initializing
the lowpan_addr_info structure in the skb headroom.
In the transmit function (lowpan_xmit), the driver calls lowpan_header
(or setup_header) which unconditionally copies and uses the lowpan_addr_info
from the headroom, which contains uninitialized data.
Fix this by dropping non IPv6 packets.
A similar fix is needed in net/bluetooth/6lowpan.c bt_xmit(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: limit injected antenna index in ieee80211_parse_tx_radiotap
When parsing the radiotap header of an injected frame,
ieee80211_parse_tx_radiotap() uses the IEEE80211_RADIOTAP_ANTENNA value
directly as a shift count:
info->control.antennas |= BIT(*iterator.this_arg);
*iterator.this_arg is an 8-bit value taken straight from the frame
supplied by userspace, so BIT() can be asked to shift by up to 255. That
is undefined behaviour on the unsigned long and is reported by UBSAN:
UBSAN: shift-out-of-bounds in net/mac80211/tx.c:2174:30
shift exponent 235 is too large for 64-bit type 'unsigned long'
Call Trace:
ieee80211_parse_tx_radiotap+0xadb/0x1950 net/mac80211/tx.c:2174
ieee80211_monitor_start_xmit+0xb1f/0x1250 net/mac80211/tx.c:2451
...
packet_sendmsg+0x3eb6/0x50f0 net/packet/af_packet.c:3109
info->control.antennas is a 2-bit bitmap (u8 antennas:2), so only antenna
indices 0 and 1 can ever be represented. Ignore any larger value instead
of shifting out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: add hook transactions for device deletions
Restore the flag that indicates that the hook is going away, ie.
NFT_HOOK_REMOVE, but add a new transaction object to track deletion
of hooks without altering the basechain/flowtable hook_list during
the preparation phase.
The existing approach that moves the hook from the basechain/flowtable
hook_list to transaction hook_list breaks netlink dump path readers
of this RCU-protected list.
It should be possible use an array for nft_trans_hook to store the
deleted hooks to compact the representation but I am not expecting
many hook object, specially now that wildcard support for devices
is in place.
Note that the nft_trans_chain_hooks() list contains a list of struct
nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while
this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE.
Note that new commands can be updated to use nft_trans_hook for
consistency.
This patch also adapts the event notification path to deal with the list
of hook transactions. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: udp: Create exceptions before socket matching
Currently, when ICMP Fragmentation Needed and Redirect Message packets
are locally delivered and quote a UDP packet, a FIB nexthop exception
(FNHE) is only created if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the FNHE cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in
fnhe_hashfun()") and commit 67d6d681e15b ("ipv4: make exception cache
less predictible") tried to mitigate such attacks by making it harder
for attackers to discover hash collisions in the FNHE cache and by
randomizing the number of exceptions a hash bucket can hold,
respectively. Unfortunately, both of the mitigations can be bypassed.
Instead, mitigate such attacks by always creating a FNHE, even before
trying to find a matching socket. Do that by calling ipv4_update_pmtu()
and ipv4_redirect(), the helpers used when the quoted packet did not
originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in a FNHE being created or updated in the cache that the
attacker can observe.
Pass an oif of 0, in a similar fashion to icmp_err(). This is also the
oif used by the socket path for sockets that are not bound to a device.
Note that this does not allow attackers to create FNHEs that they could
not create before, as both helpers can already be reached with little to
no validation. For example, by sending an ICMP error that quotes an ICMP
Echo Reply or one that quotes a UDP source port that matches a wildcard
socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ipv4_sk_update_pmtu() /
ipv4_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the FNHE cache of the nexthop resolved by the no socket helpers and
another in the FNHE cache of the nexthop used by the socket. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: fix swapped-out resources never leaving their bulk_move range
ttm_tt_swapout() returns the number of pages swapped out on success and
a negative error code on failure; for a populated ttm it never returns
zero. Commit b2ed01e7ad3d ("drm/ttm: Fix ttm_bo_swapout() infinite LRU
walk on swapout failure") moved the bulk_move bookkeeping in
ttm_bo_swapout_cb() under "if (!ret)", so the
ttm_resource_del_bulk_move_unevictable() / ttm_resource_move_to_lru_tail()
pair is now skipped on every successful swapout. The equivalent change
for the shrinker in commit 1d59f36e95f7 ("drm/ttm: Fix ttm_bo_shrink()
infinite LRU walk on backup failure") tests "lret > 0", which is what
was intended here as well.
Before b2ed01e7ad3d the resource was taken off the bulk_move before the
swapout; since then a swapped-out resource stays inside its BO's
bulk_move range (and on the manager LRU) although it is unevictable.
When it is later freed or the BO leaves the bulk_move
(ttm_resource_free(), ttm_bo_set_bulk_move() via amdgpu_vm_bo_del()),
ttm_resource_del_bulk_move() skips it because of its
!ttm_resource_unevictable() guard, so a range endpoint in pos->first /
pos->last is left pointing at freed memory. The next
ttm_lru_bulk_move_tail() or ttm_resource_add_bulk_move() on that cursor
is a use-after-free, seen as the resv WARN in ttm_lru_bulk_move_add(),
"list_del corruption" in ttm_resource_move_to_lru_tail() or a NULL
dereference in ttm_resource_manager_next() -- minutes to hours after a
hibernation, or at process exit / reboot following one. Samuel
Ainsworth's analysis of drm/amd issue 5387 (see Link) identified the
dangling cursor; the missing removal at swapout time is the reason it
dangles.
Testing the condition for success restores the removal. On an AMD
Phoenix APU (ASUS UM3406GA, gfx1103) running suspend-then-hibernate on
a 7.0.y stable kernel carrying the backport (Ubuntu 7.0.0-31) the bug
crashed 5 of 18 hibernation cycles; a function profile of one
hibernation showed 336 ttm_tt_swapout() calls and zero
ttm_resource_del_bulk_move_unevictable() calls. With this change the
removal happens for every swapped-out resource and 12 further cycles
were clean. |
| In the Linux kernel, the following vulnerability has been resolved:
regcache: Do not overwrite error code when finalizing cache after error
During regcache initialization, if an error occurs in the
cache_ops->populate callback, and if cache operations include an exit
callback, the error code from populate() is overwritten with the return
value from exit(). This hides the error condition from the caller of
regcache_init(), and can cause NULL pointer dereferences when the regcache
is later accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Don't enumerate SPDIF1 at DAIO initialization
The recent refactoring of xfi driver changed the assignment of
atc->daios[] at atc_get_resources(); now it loops over all enum
DAIOTYP entries while it looped formerly only a part of them.
The problem is that the last entry, SPDIF1, is a special type that
is used only for hw20k1 CTSB073X model (as a replacement of SPDIFIO),
and there is no corresponding definition for hw20k2. Due to the lack
of the info, it caused a kernel crash on hw20k2, which was already
worked around by the commit b045ab3dff97 ("ALSA: ctxfi: Fix missing
SPDIFI1 index handling").
This patch addresses the root cause of the regression above properly,
simply by skipping the incorrect SPDIF1 type in the parser loop.
For making the change clearer, the code is slightly arranged, too. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix crash in ethtool offline loopback test
Since the conversion of ice to page pool, the ethtool loopback test
crashes:
BUG: kernel NULL pointer dereference, address: 000000000000000c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 1100f1067 P4D 0
Oops: Oops: 0002 [#1] SMP NOPTI
CPU: 23 UID: 0 PID: 5904 Comm: ethtool Kdump: loaded Not tainted 6.19.0-0.rc7.260128g1f97d9dcf5364.49.eln154.x86_64 #1 PREEMPT(lazy)
Hardware name: [...]
RIP: 0010:ice_alloc_rx_bufs+0x1cd/0x310 [ice]
Code: 83 6c 24 30 01 66 41 89 47 08 0f 84 c0 00 00 00 41 0f b7 dc 48 8b 44 24 18 48 c1 e3 04 41 bb 00 10 00 00 48 8d 2c 18 8b 04 24 <89> 45 0c 41 8b 4d 00 49 d3 e3 44 3b 5c 24 24 0f 83 ac fe ff ff 44
RSP: 0018:ff7894738aa1f768 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000700 RDI: 0000000000000000
RBP: 0000000000000000 R08: ff16dcae79880200 R09: 0000000000000019
R10: 0000000000000001 R11: 0000000000001000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ff16dcae6c670000
FS: 00007fcf428850c0(0000) GS:ff16dcb149710000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000000c CR3: 0000000121227005 CR4: 0000000000773ef0
PKRU: 55555554
Call Trace:
<TASK>
ice_vsi_cfg_rxq+0xca/0x460 [ice]
ice_vsi_cfg_rxqs+0x54/0x70 [ice]
ice_loopback_test+0xa9/0x520 [ice]
ice_self_test+0x1b9/0x280 [ice]
ethtool_self_test+0xe5/0x200
__dev_ethtool+0x1106/0x1a90
dev_ethtool+0xbe/0x1a0
dev_ioctl+0x258/0x4c0
sock_do_ioctl+0xe3/0x130
__x64_sys_ioctl+0xb9/0x100
do_syscall_64+0x7c/0x700
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
It crashes because we have not initialized libeth for the rx ring.
Fix it by treating ICE_VSI_LB VSIs slightly more like normal PF VSIs and
letting them have a q_vector. It's just a dummy, because the loopback
test does not use interrupts, but it contains a napi struct that can be
passed to libeth_rx_fq_create() called from ice_vsi_cfg_rxq() ->
ice_rxq_pp_create(). |