| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Avoid truncating memory addresses
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest. |
| A 32-bit integer wraparound in the MongoDB C Driver's Windows-only Kerberos/SSPI authentication code can cause an undersized heap buffer to be allocated when an excessively long credential value is supplied in the client's connection configuration. A party able to control that client-side configuration, in conjunction with the affected authentication mechanism, can cause the driver to write outside the bounds of the allocated buffer. This may result in corruption of client process memory and denial of service of the client application. The issue affects only client builds compiled with the Windows-native authentication backend. |
| Integer overflow in OpenModSim (<=1.11.0), leading to denial of service |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::FileDownlink SendPartial range validation is vulnerable because unchecked startOffset plus length arithmetic bypasses the range check and stores a wrapped m_endOffset that is inconsistent with m_byteOffset. When an existing source file is larger than a valid startOffset and a SendPartial command supplies a length whose U32 sum with that offset wraps below the file size, under standard F Prime assertion handling, the first data-packet transition reaches FW_ASSERT and aborts or resets the process, causing denial of service. This issue is fixed in version 4.3.0. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::FpySequencer STORE directive stack write validation the bounds check adds attacker-controlled offset and size before memcpy, allowing integer wraparound to make an out-of-range destination appear valid. When a sequence-controlled STORE directive supplies a stack offset and size whose U32 sum wraps, memcpy can write outside the sequencer stack, causing memory corruption, denial of service, and potentially code execution. This issue is fixed in version 4.2.0. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::FileUplink handleDataPacket offset and size validation is vulnerable because the component checks byteOffset plus dataSize with wrapping U32 arithmetic and then seeks to the large attacker-controlled offset before writing. When a file-uplink DATA packet supplies a byteOffset and dataSize whose unsigned sum wraps below the declared file size, data can be written beyond the declared upload size, causing file integrity loss and potentially large sparse-file growth or resource exhaustion. This issue is fixed in version 4.2.0. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::FileDownlink SendPartial range validation is vulnerable because the wrapping sum bypasses file-range validation, becomes m_endOffset, and leaves m_byteOffset greater than the wrapped end offset. When an existing source file is larger than the supplied startOffset and a caller able to issue SendPartial supplies a length whose U32 sum with that offset wraps, the first data-packet send reaches FW_ASSERT and aborts or resets the process, causing denial of service. This issue is fixed in version 4.3.0. |
| Integer overflow or wraparound in Windows Virtualization-Based Security (VBS) Enclave allows an authorized attacker to elevate privileges locally. |
| Wasmtime before 36.0.16, 37.0.0 before 48.0.3, and 49.0.0 before 49.0.1 contains a denial of service vulnerability in wasmtime-wasi that allows guest WASI programs to panic the host via overflowing filesystem timestamps. Attackers can pass atim or mtim values whose sub-second field overflows the seconds field to path_filestat_set_times, fd_filestat_set_times, set-times, or set-times-at, crashing the host. |
| Photoshop Desktop is affected by an Integer Overflow or Wraparound vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Photoshop Desktop is affected by an Integer Overflow or Wraparound vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for insert range
smb3_insert_range() does not check if the new file size
(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass
RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t
range.
Use check_add_overflow() to calculate the new EOF. Validate it with
inode_newsize_ok() before modifying the file.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB
# A regular write is stopped at 3 MiB.
dd if=/dev/zero of="$FILE" bs=1M count=4 status=none
stat -c "size after write: %s" "$FILE"
# Insert 2 MiB into a 2 MiB file.
truncate -s 2M "$FILE"
fallocate -i -o 0 -l 2M "$FILE"
stat -c "size after insert: %s" "$FILE"
'
Before this change, the regular write stops at the 3 MiB limit, but
insert range grows the file to 4 MiB:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
size after insert: 4194304
After this change, insert range also fails at the limit and leaves the
2 MiB file unchanged:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
fallocate: fallocate failed: File too large
size after insert: 2097152 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry. |
| AMI APTIOV contains vulnerabilities in BIOS
where users may cause “Integer Overflow or Wraparound” by local access. Successful exploitation of this vulnerability could
lead to buffer overflows, memory corruption, and arbitrary code execution, and
also impact Confidentiality, Integrity, and Availability. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 6.9.13-56 and 7.1.2-31, a crafted local call to the GetVirtualPixels API can trigger an integer calculation error and write beyond a heap buffer, crashing the server process. This issue is fixed in versions 6.9.13-56 and 7.1.2-31. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-31, a client connected to the distributed pixel cache server can send crafted pixel data that triggers an integer-size calculation error and a heap buffer overwrite, crashing the server. This issue is fixed in version 7.1.2-31. |
| libspatialite through 5.1.0 contains an integer overflow vulnerability in the WKB point and vertex count size guard of ParseWkbLine and related parsers in gg_wkb.c, allowing out-of-bounds reads. Attackers can supply a crafted geometry BLOB with a large point count, for example in a SpatiaLite database file, to crash the process or corrupt heap memory on 32-bit builds. |
| The GUIX binary resource loader never checks that a font page's glyph range is well formed. `gx_page_header_first_glyph` and `gx_page_header_last_glyph` are read verbatim from the file and only the upper bound of `last_glyph` is validated, so a page declaring `first_glyph > last_glyph` makes `last - first + 1` underflow to a very large unsigned count.
That count is multiplied by a glyph record size to reserve the load buffer, and the multiply is unchecked, so it wraps to a small value and the loader allocates a buffer far smaller than the data it is about to write. The load pass then recomputes the count in a narrower type and writes attacker-controlled glyph records into the undersized buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: prevent TX_RING byte count overflow
tpacket_snd() drains every SEND_REQUEST frame in a TX ring and adds
each valid packet length to the signed int len_sum. Userspace can
recycle completed frames concurrently, so a single blocking send call
is not bounded by the ring size.
After enough successful transmissions len_sum wraps into the negative
range. In particular, 65536 65535-byte frames followed by a 65007-byte
frame produce 0xfffffdef, or -EIOCBQUEUED. sock_sendmsg_nosec() treats
that as an impossible return and triggers a BUG. On systems configured
to panic on oops, a CAP_NET_RAW holder can panic the host kernel.
Stop before the next frame would make the byte count exceed INT_MAX.
The positive short count leaves that frame pending for a later send
call.
A two-thread TPACKET_V2 reproducer triggered the BUG on an arm64 build
of Linux 7.3-rc4. With this change, the same reproducer returned the
expected positive short count without an oops. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Ignore Port I/O requests of length '0'
Explicitly ignore Port I/O requests of length '0' (or count '0'), so that
setting up the software scratch area (and other code) doesn't have to
worry about underflowing the length, and to allow for WARNing on trying
to configure the scratch area with len==0. |
